Discovering peeling and flaking paint on your home's exterior can be frustrating, but it's a common issue that many homeowners face. Addressing this problem effectively is crucial not only for the aesthetics of your home but also for its protection and longevity. Here’s a comprehensive guide on how to tackle peeling and flaking paint, featuring INSL-X Peel Bond Primer by Benjamin Moore and adhering to proper lead-based paint protocols.

Step 1: Assess the Situation

First, identify the extent of the peeling and flaking paint. Large areas of damaged paint may indicate underlying issues such as moisture problems or previous paint failure. It's also essential to check whether the existing paint contains lead, especially if your home was built before 1978. Lead-based paint can pose serious health risks, and special precautions are necessary during removal.

Step 2: Follow Lead-Based Paint Safety Protocols

If there is a possibility of lead-based paint, it's important to follow EPA’s Renovation, Repair, and Painting (RRP) Rule, which includes:

Testing for lead: Hire a professional to test for lead paint. If lead is present, consider engaging a certified lead abatement contractor to handle the removal safely.

Containing the area: Use plastic sheeting to seal off the work area and prevent lead paint dust from spreading.

Using proper safety gear: Wear appropriate personal protective equipment such as gloves, goggles, and HEPA-filter respirators.

Step 3: Prepare the Surface

Once safety measures are in place, it's time to prepare the surface:

Remove loose paint: Use a paint scraper or a wire brush to remove all the loose and flaking paint. If using power tools, ensure they are equipped with vacuum attachments to contain lead dust.

Clean the surface: Wash the area with soap and water to remove any dust, dirt, and debris. Allow it to dry completely.

Step 4: Apply INSL-X Peel Bond Primer

INSL-X Peel Bond is a high-build, water-based bonding primer that is excellent for weathered surfaces. It helps in smoothing rough surfaces and can bridge and seal cracks and gaps, providing a more uniform surface for painting:

Apply the primer: Use a brush or roller to apply INSL-X Peel Bond Primer evenly. It’s specifically designed to adhere well and reduce further peeling and flaking.

Allow drying time: Follow the manufacturer’s instructions for drying time before proceeding to paint.

Step 5: Painting

Once the primer has dried completely, you are ready to paint. Choose a high-quality exterior paint suitable for your home's surface type and environmental conditions. We recommend exterior paints from Sherwin-Williams and Benjamin Moore.

Step 6: Maintenance

Regular maintenance can significantly extend the life of your paint job. Inspect your home's exterior annually and touch up any areas where paint begins to fail promptly. Keeping gutters clean and ensuring your home is properly sealed will also help prevent moisture penetration that can lead to paint issues.

By following these steps, using quality products like INSL-X Peel Bond Primer, and adhering to safety protocols for lead-based paint, you can effectively address peeling and flaking paint on your home's exterior. This not only enhances your home’s curb appeal but also protects its structural integrity for years to come.